Explosion-Proof Electric Motor with B3 Installation and C4 Protection Level

• Customization: Available
• Application: Industrial
• Speed: 0-6000r/Min
• Model NO.: YBX5
• Number of Stator: Three-Phase
• Function: Driving
• Casing Protection: Explosion-Proof Type
• Number of Poles: 2p-12p
• Starting Mode: Auto-induction Voltage-reduced Starting
• Certification: CCC
• Brand: Wolong
• Installation Method: B3/B5/B35/V1
• Incoming Line Method: Bell Mouth /Threaded End /Gland Head
• Corrosion Protection Level: C3/C4/C5/C6
• Insulation Level: F/H
• Transport Package: Wooden Box
• Trademark: OEM/ODM
• Origin: China
• Production Capacity: 5000000/Year

Product Description

Product Description

Standards
Standard name	IEC	EN	GB
Rotating electrical machines Rating and operating behavior	IEC 60034-1	EN 60034-1	GB/T755
Process for determining losses and efficiency of rotating electrical machines by means of testing	IEC 60034-2-1	EN 60034-2-1	GB/T1032
Protection types of rotating electrical machines based on overall construction(IP-Code) - Introduction	IEC 60034-5	EN 60034-5	GB/T 4942.1
Classification of the cooling processes (IC code)	IEC 60034-6	EN 60034-6	GB/T 1993
Classification of the design types, the installation types and the terminal box location (IM-Code)	IEC 60034-7	EN 60034-7	GB/T 997
Terminal markings and direction of rotation	IEC 60034-8	EN 60034-8	GB 1971
Noise emission limit values	IEC 60034-9	EN 60034-9	GB/T 10069.3
Starting performance of three-phase motors with squirrel-cage rotor, except for pole-changing motors	IEC 60034-12	EN 60034-12	-
Mechanical vibrations of certain machines with a shaft height of 56 mm and higher;measurement, evaluation and limit values of the vibration	IEC 60034-14	EN 60034-14	GB/T 10068
Efficiency classification of three-phase motors with squirrel-cage rotors, except for pole- changing motors (IE code)	IEC 60034-30-1	EN 60034-30	GB18613
Balancing value	ISO 1940	-	-
IEC standard voltages IEC	IEC 60038	-	-
Evaluation and classifications of electric insulation according to its thermal behavior	IEC 60085	-	GB/T 11021
Three-phase induction motors for general use with standardized dimensions and powers	IEC 60072-1	EN 50347	GB/T 4772.1
Explosive atmosphere - Part 0: Equipment General requirements	IEC 60079-0	EN 60079-0	GB 3836.1
Explosive atmosphere - Part 1: Equipment protection through flameproof enclosure "d"	IEC 60079-1	EN 60079-1	GB 3836.2
Explosive atmosphere - Part 7:Equipment protection through increased safety "e"	IEC 60079-7	EN 60079-7	GB 3836.2
Electrical equipment for use in areas with inflammable dust - protection of the housing	IEC 60079-31	EN 60079-31	-

Frame Size	Synchronous speed r/min
	3000	1500	1000	750	600	500	429	375
	Power (kW)

80M1	0.75	0.55	0.37	0.18
80M2	1.1	0.75	0.55	0.25
90S	1.5	1.1	0.75	0.37
90L	2.2	1.5	1.1	0.55
100L1	3	2.2	1.5	0.75
100L2	-	3	-	1.1
112M	4	4	2.2	1.5
132S1	5.5	5.5	3	2.2
132S2	7.5	5.5	3	2.2
132M1	-	7.5	4	3
132M2	-	7.5	5.5	3
160M1	11	11	7.5	4
160M2	15	11	7.5	5.5
160L	18.5	15	11	7.5
180M	22	18.5	-	-
180L	-	22	15	11
200L1	30	30	18.5	15
200L2	37	30	22	15
225S	-	37	-	18.5
225M	45	45	30	22
250M	55	55	37	30
280S	75	75	45	37
280M	90	90	55	45
315S	110	110	75	55
315M	132	132	90	75
315L1	160	160	110	90
315L2	200	200	132	110
355S1	(185)	(185)	160	132
355S2	(200)	(200)	160	132
355M1	(220)	(220)	(185)	160
355M2	250	250	200	160
355L1	(280)	(280)	(220)	(185)
355L2	315	315	250	200

Experience the power and efficiency of our high-performance electric motor, designed to deliver 50Hz frequency at a remarkable 3000 revolutions per minute.-1 (2 pole)
 

Type		I N (A)				η(%)			cos Ф
	kW	230V	400V	690V	rpm	1.0PN	0.75PN	0.5PN	1.0PN	0.75PN	0.5PN	TN    N.m	I A / I N	TL / TN	TB / TN	LW / LP dB(A)	kg.m2	kg
WEX3-80M1-2	0.75	2.78	1.60	-	2864	80.7	81.4	80.1	0.83	0.79	0.71	2.5	6.6	3.1	3.2	62/50	0.0012	32
WEX3-80M2-2	1.1	4.00	2.30	-	2852	82.7	83.2	82.3	0.83	0.81	0.73	3.7	6.6	3.1	3.2	62/50	0.0014	34
WEX3-90S-2	1.5	5.39	3.10	-	2881	84.2	85.4	83.8	0.84	0.81	0.75	5	7.3	2.9	3.4	67/55	0.0016	40
WEX3-90L-2	2.2	8.17	4.70	-	2881	85.9	86.8	85.1	0.85	0.8	0.74	7.3	7.9	3.6	3.73	67/55	0.0018	42
WEX3-100L-2	3	10.09	5.80	-	2907	87.1	88.9	87.2	0.87	0.83	0.77	9.9	8.2	2.6	3.135	74/62	0.0058	63
WEX3-112M-2	4	-	7.5	4.3	2903	88.1	88.7	88.2	0.88	0.84	0.77	13.2	7.6	2.5	3.55	77/65	0.0076	63
WEX3-132S1-2	5.5	-	10.3	6.0	2916	89.2	89.5	88.3	0.88	0.84	0.77	18	8.7	3.0	3.9	79/67	0.0159	80
WEX3-132S2-2	7.5	-	13.6	7.9	2909	90.1	91.1	90.4	0.89	0.86	0.8	24.6	8.4	2.95	3.77	79/67	0.0195	87
WEX3-160M1-2	11	-	20.0	11.6	2943	91.2	91.8	91.5	0.89	0.86	0.8	35.7	7.9	2.9	3.8	81/68	0.05	174
WEX3-160M2-2	15	-	26.7	15.5	2940	91.9	93.0	92.2	0.89	0.86	0.8	48.7	8.0	2.9	3.6	81/68	0.057	184
WEX3-160L-2	18.5	-	32.5	18.8	2938	92.4	93.0	93.1	0.89	0.88	0.82	60.1	8.1	2.9	3.5	81/68	0.067	206
WEX3-180M-2	22	-	38.7	22.4	2953	92.7	93.1	93.1	0.89	0.88	0.82	71.1	8.2	2.2	2.3	83/70	0.098	238
WEX3-200L1-2	30	-	53.0	30.7	2970	93.3	93.6	93.2	0.89	0.88	0.82	96.5	7.5	2.2	2.3	84/71	0.20	310
WEX3-200L2-2	37	-	65	38	2968	93.7	94.1	93.5	0.89	0.87	0.81	119	7.5	2.2	2.3	84/71	0.23	320
WEX3-225M-2	45	-	78	45	2966	94.0	94.2	94.0	0.89	0.87	0.81	145	7.6	2.2	2.3	86/73	0.41	460
WEX3-250M-2	55	-	95	55	2969	94.3	94.7	94.3	0.89	0.88	0.82	177	7.6	2.2	2.3	89/75	0.48	510
WEX3-280S-2	75	-	128	74	2978	94.7	94.9	94.5	0.89	0.88	0.82	241	6.9	2.0	2.3	91/77	0.89	630
WEX3-280M-2	90	-	154	89	2978	95.0	95.1	94.8	0.89	0.88	0.82	289	7.0	2.0	2.3	91/77	1.08	705
WEX3-315S-2	110	-	187	108	2975	95.2	95.3	95.0	0.9	0.88	0.82	353	7.1	1.9	2.2	92/78	1.76	1070
WEX3-315M-2	132	-	224	130	2975	95.4	95.5	95.2	0.9	0.88	0.82	424	7.1	1.9	2.2	92/78	1.88	1100
WEX3-315L1-2	160	-	260	151	2975	95.6	95.8	95.3	0.91	0.88	0.82	514	7.1	1.9	2.2	92/78	2.077	1175
WEX3-315L-2	185	-	314	182	2976	95.7	95.8	95.6	0.91	0.88	0.82	594	7.1	1.9	2.2	92/78	2.35	1235
WEX3-315L2-2	200	-	333	193	2979	95.8	96.0	95.7	0.91	0.88	0.82	641	7.1	1.9	2.2	92/78	2.77	1395
WEX3-355S1-2	185	-	313	181	2987	95.8	95.8	95.4	0.91	0.88	0.82	591	7.1	1.9	2.2	100/85	3.46	1535
WEX3-355S2-2	200	-	333	193	2987	95.8	95.8	95.4	0.91	0.88	0.82	639	7.1	1.9	2.2	100/85	4.38	1690
WEX3-355M1-2	220	-	373	216	2986	95.8	95.9	95.5	0.91	0.88	0.82	704	7.1	1.8	2.2	100/85	4.38	1690
WEX3-355M2-2	250	-	419	243	2987	95.8	95.9	95.5	0.91	0.88	0.83	799	7.1	1.8	2.2	100/85	4.96	1785
WEX3-355L1-2	280	-	469	272	2985	95.8	95.9	95.5	0.91	0.88	0.83	896	7.1	1.8	2.2	100/85	4.97	1865
WEX3-355L2-2	315	-	520	301	2987	95.8	95.9	95.5	0.91	0.88	0.83	1007	7.1	1.8	2.2	100/85	5.95	2025
WEX3-355LX1-2	355	-	592	343	2988	95.8	95.9	95.5	0.91	0.88	0.83	1135	7.1	1.8	2.2	104/89	6.7	2165
WEX3-355LX2-2	375	-	628	364	2987	95.8	95.9	95.5	0.91	0.88	0.83	1199	7.1	1.8	2.2	104/89	6.7	2180

50Hz Harness the steady and reliable performance of 50Hz frequency, delivering a smooth 1500 revolutions per minute for optimal functionality.-1 (4 pole)
 

Type		I N (A)				η(%)			cos Ф
	kW	230V	400V	690V	rpm	1.0PN	0.75PN	0.5PN	1.0PN	0.75PN	0.5PN	TN    N.m	I A / I N	TL / TN	TB / TN	LW / LP dB(A)	kg.m2	kg
WEX3-80M1-4	0.55	2.26	1.3	-	1430	80.8	80.6	80.3	0.75	0.65	0.5	3.7	6.3	2.3	2.3	56/44	0.0024	34
WEX3-80M2-4	0.75	3.13	1.8	-	1435	82.5	83.7	82.1	0.75	0.66	0.51	5	6.5	2.3	2.3	56/44	0.003	36
WEX3-90S-4	1.1	4.35	2.5	-	1422	84.1	85.6	85.4	0.75	0.7	0.63	7.4	6.6	2.3	2.3	59/47	0.0036	41
WEX3-90L-4	1.5	5.91	3.4	-	1421	85.3	86.5	86.7	0.75	0.7	0.63	10.1	6.9	2.3	2.3	59/47	0.0045	46
WEX3-100L1-4	2.2	8.00	4.6	-	1447	86.7	86.9	86.2	0.81	0.76	0.64	14.5	7.5	2.3	2.3	64/52	0.011	45
WEX3-100L2-4	3	10.43	6.0	-	1442	87.7	88.4	87.5	0.82	0.77	0.67	19.9	7.6	2.3	2.3	64/52	0.014	55
WEX3-112M-4	4	-	7.9	4.6	1433	88.6	88.7	88.8	0.82	0.77	0.66	26.7	7.8	2.5	3.2	65/53	0.02	68
WEX3-132S-4	5.5	-	10.8	6.3	1457	89.6	90.2	89.7	0.82	0.77	0.67	36	7.5	2.0	2.3	71/59	0.033	91
WEX3-132M-4	7.5	-	14.9	8.6	1455	90.4	91.3	91.0	0.83	0.78	0.69	49.2	7.4	2.0	2.3	71/59	0.037	98
WEX3-160M-4	11	-	20.5	11.9	1469	91.4	92.3	91.6	0.85	0.81	0.7	71.5	7.5	2.2	2.3	73/60	0.094	187
WEX3-160L-4	15	-	27.7	16.1	1469	92.1	93.0	92.2	0.86	0.81	0.7	97.5	7.5	2.2	2.3	73/60	0.11	210
WEX3-180M-4	18.5	-	33.5	19.4	1479	92.6	92.9	92.6	0.86	0.81	0.71	119.4	7.0	2.3	2.8	76/63	0.21	249
WEX3-180L-4	22	-	40.0	23.2	1479	93.0	93.4	93.2	0.86	0.81	0.71	142	7.0	2.3	2.8	76/63	0.23	267
WEX3-200L-4	30	-	54	31	1478	93.6	94.0	93.6	0.86	0.82	0.72	193.8	7.2	2.2	2.3	76/63	0.42	300
WEX3-225S-4	37	-	65	38	1480	93.9	94.1	94.0	0.86	0.82	0.75	238.7	7.6	2.7	2.6	78/65	0.48566	430
WEX3-225M-4	45	-	79	46	1479	94.2	94.5	94.4	0.86	0.84	0.77	290.5	7.4	2.7	2.6	78/65	0.55258	460
WEX3-250M-4	55	-	95	55	1482	94.6	95.1	94.4	0.86	0.83	0.74	354.4	6.6	2.5	2.6	79/65	0.89251	520
WEX3-280S-4	75	-	130	75	1486	95.0	95.2	94.8	0.88	0.85	0.78	481.9	7.8	3.3	3.3	80/66	1.55032	655
WEX3-280M-4	90	-	160	93	1486	95.2	95.5	95.1	0.88	0.85	0.78	578.3	7.9	3.4	3.3	80/66	1.86355	730
WEX3-315S-4	110	-	187	108	1488	95.4	95.6	95.2	0.89	0.85	0.78	705.9	6.5	1.9	3.2	88/74	3.57097	1105
WEX3-315M-4	132	-	224	130	1489	95.6	95.8	95.3	0.89	0.85	0.78	846.5	6.9	2.2	3.4	88/74	4.20216	1185
WEX3-315L1-4	160	-	271	157	1487	95.8	96.0	95.5	0.89	0.85	0.78	1027.5	5.9	1.8	2.9	88/74	4.66295	1270
WEX3-315L-4	185	-	313	181	1487	95.9	96.0	95.6	0.89	0.85	0.78	1188	5.9	1.9	2.9	88/74	4.83418	1290
WEX3-315L2-4	200	-	338	196	1487	96.0	96.2	95.7	0.89	0.85	0.78	1284.3	5.9	1.9	2.9	88/74	5.42044	1420
WEX3-355S1-4	185	-	313	181	1490	96.0	96.2	95.7	0.89	0.85	0.78	1185.6	6.9	2.0	2.2	95/80	6.87719	1660
WEX3-355S2-4	200	-	339	197	1490	96.0	96.2	95.7	0.89	0.85	0.78	1281.7	6.9	2.0	2.2	95/80	7.6284	1740
WEX3-355M1-4	220	-	372	216	1490	96.0	96.2	95.7	0.89	0.85	0.78	1409.9	6.9	2.0	2.2	95/80	8.17419	1775
WEX3-355M2-4	250	-	422	245	1490	96.0	96.2	95.7	0.89	0.85	0.78	1602.2	6.9	2.0	2.2	95/80	8.56635	1830
WEX3-355L1-4	280	-	473	274	1489	96.0	96.2	95.7	0.89	0.85	0.78	1795.6	6.9	2.0	2.2	95/80	8.56198	1910
WEX3-355L2-4	315	-	532	308	1489	96.0	96.2	95.7	0.89	0.85	0.78	2020.1	6.9	2.0	2.2	95/80	9.85043	2040
WEX3-355LX1-4	355	-	600	348	1489	96.0	96.2	95.7	0.88	0.85	0.78	2276.6	6.9	2.0	2.2	102/87	10.59951	2115
WEX3-355LX2-4	375	-	634	368	1490	96.0	96.2	95.7	0.88	0.85	0.78	2403.3	6.9	2.0	2.2	102/87	12.42735	2295

50Hz Unleash the potential of 1000 revolutions per minute at a consistent 50Hz frequency, ensuring reliable performance and durability.-1 (6 pole)
 

Type		I N (A)				η(%)			cos Ф
	kW	230V	400V	690V	rpm	1.0PN	0.75PN	0.5PN	1.0PN	0.75PN	0.5PN	TN    N.m	I A / I N	TL / TN	TB / TN	LW / LP dB(A)	kg.m2	kg
WEX3-80M1-6	0.37	1.74	1.0	-	908	73.5	73.4	73.3	0.7	0.62	0.5	3.9	4.7	1.9	2	54/42	0.0031	25
WEX3-80M2-6	0.55	2.43	1.4	-	914	77.2	76.9	76.5	0.72	0.62	0.47	5.7	4.7	1.9	2.1	54/42	0.004	29
WEX3-90S-6	0.75	3.30	1.9	-	945	78.9	80.1	78.1	0.72	0.65	0.57	7.6	5.8	2.1	2.1	57/45	0.0058	42
WEX3-90L-6	1.1	4.70	2.7	-	939	81.0	81.4	80.5	0.73	0.66	0.57	11.2	5.9	2.1	2.1	57/45	0.0074	47
WEX3-100L-6	1.5	6.09	3.5	-	953	82.5	82.9	82.2	0.74	0.69	0.58	15	6.0	2.1	2.1	61/49	0.016	64
WEX3-112M-6	2.2	8.87	5.1	-	945	84.3	84.2	83.5	0.74	0.69	0.57	22.2	6.0	2.1	2.1	65/53	0.021	67
WEX3-132S-6	3	11.30	6.5	-	957	85.6	86.3	85.6	0.74	0.67	0.55	29.8	6.2	2.0	2.1	69/57	0.025	75
WEX3-132M1-6	4	-	8.6	5.0	958	86.8	87.6	87.2	0.74	0.68	0.56	39.7	6.8	2.0	2.1	69/57	0.035	89
WEX3-132M2-6	5.5	-	11.7	6.8	960	88.0	89.4	88.0	0.75	0.7	0.58	54.5	7.1	2.0	2.1	69/57	0.048	100
WEX3-160M-6	7.5	-	15.6	9.0	971	89.1	89.6	89.3	0.78	0.73	0.6	73.5	6.7	2.1	2.1	73/60	0.12	179
WEX3-160L-6	11	-	22.5	13.0	971	90.3	90.9	90.5	0.78	0.74	0.63	108	6.9	2.1	2.1	73/60	0.17	224
WEX3-180L-6	15	-	30.3	17.6	976	91.2	91.8	91.8	0.81	0.76	0.66	146	7.2	2.0	2.1	73/60	0.27	270
WEX3-200L1-6	18.5	-	38	22	982	91.7	92.2	92.0	0.81	0.76	0.67	179	7.2	2.1	2.1	73/60	0.41	285
WEX3-200L2-6	22	-	42	24	981	92.2	92.6	92.1	0.82	0.77	0.67	214	7.3	2.1	2.1	73/60	0.47	312
WEX3-225M-6	30	-	58	34	980	92.9	93.1	92.7	0.81	0.77	0.67	389	7.1	2.0	2.1	74/61	0.97	450
WEX3-250M-6	37	-	68	39	986	93.3	93.7	93.5	0.84	0.8	0.7	357	7.1	2.1	2.1	76/62	1.29	510
WEX3-280S-6	45	-	83	48	988	93.7	94.1	93.8	0.86	0.82	0.75	434	7.2	2.1	2.0	78/64	2.71	630
WEX3-280M-6	55	-	98	57	988	94.1	94.3	94.1	0.86	0.82	0.75	530	7.2	2.1	2.0	78/64	3.35	705
WEX3-315S-6	75	-	135	78	987	94.6	94.7	94.2	0.85	0.82	0.75	726	6.7	2.0	2.0	83/69	4.12	1090
WEX3-315M-6	90	-	160	93	987	94.9	95.1	94.6	0.84	0.82	0.75	871	6.7	2.0	2.0	83/69	4.87	1170
WEX3-315L1-6	110	-	196	114	987	95.1	95.2	94.8	0.85	0.82	0.75	1064	6.7	2.0	2.0	83/69	5.42	1255
WEX3-315L2-6	132	-	232	134	987	95.4	95.5	95.2	0.86	0.83	0.75	1277	6.7	2.0	2.0	83/69	6.44	1420
WEX3-355S-6	160	-	278	161	991	95.6	95.6	95.2	0.87	0.83	0.75	1542	6.7	2.0	2.0	85/70	10.10	1750
WEX3-355M1-6	185	-	321	186	990	95.7	95.9	95.4	0.87	0.83	0.75	1785	6.7	2.0	2.0	85/70	11.26	1840
WEX3-355M2-6	200	-	346	201	991	95.8	95.9	95.4	0.87	0.83	0.75	1927	6.7	2.0	2.0	85/70	12.45	1930
WEX3-355L1-6	220	-	394	228	991	95.8	95.9	95.4	0.87	0.83	0.75	2120	6.7	2.0	2.0	85/70	13.18	2075
WEX3-355L2-6	250	-	433	251	991	95.8	95.9	95.4	0.87	0.83	0.75	2409	6.7	2.0	2.0	85/76	14.82	2195
WEX3-355LX1-6	280	-	491	285	991	95.8	95.9	95.4	0.87	0.83	0.75	2698	6.7	2.0	2.0	91/76	15.52	2250
WEX3-355LX2-6	315	-	565	328	991	95.8	95.9	95.4	0.87	0.83	0.75	3036	6.7	2.0	2.0	91/76	15.99	2290

50Hz 750 min-1 (8 pole)

 

Type		I N (A)				η(%)			cos Ф
	kW	230V	400V	690V	rpm	1.0PN	0.75PN	0.5PN	1.0PN	0.75PN	0.5PN	TN    N.m	I A / I N	TL / TN	TB / TN	LW / LP dB(A)	kg.m2	kg
WEX3-100L1-8	0.75	3.83	2.2	-	703	75.0	74.2	73.9	0.67	0.59	0.46	10.2	4.0	1.8	2.0	59/47	0.012	65
WEX3-100L2-8	1.1	5.22	3	-	714	77.7	77.2	76.7	0.67	0.6	0.46	14.7	5.0	1.8	2.0	59/47	0.016	72
WEX3-112M-8	1.5	6.61	3.8	-	719	79.7	78.8	78.1	0.71	0.62	0.49	19.9	5.0	1.8	2.0	61/49	0.023	64
WEX3-132S-8	2.2	9.57	5.5	-	712	81.9	80.4	80.0	0.71	0.63	0.5	29.5	6.0	1.8	2.0	64/52	0.029	103
WEX3-132M-8	3	12.35	7.1	-	713	83.5	82.2	81.5	0.73	0.65	0.51	40.2	6.0	1.8	2.0	64/52	0.04	122
WEX3-160M1-8	4	-	9.3	5.4	727	84.8	84.3	84.1	0.73	0.65	0.52	52.5	6.0	1.9	2.0	68/55	0.082	155
WEX3-160M2-8	5.5	-	12.4	7.2	726	86.2	85.9	85.7	0.74	0.67	0.54	72.3	6.0	1.9	2.0	68/55	0.1	169
WEX3-160L-8	7.5	-	16.5	9.6	728	87.3	87.0	86.8	0.75	0.69	0.56	98.4	6.0	1.9	2.0	68/55	0.14	206
WEX3-180L-8	11	-	23.9	13.9	734	88.6	88.4	88.1	0.75	0.69	0.56	143	6.5	2.0	2.0	70/57	0.26	268
WEX3-200L-8	15	-	31.8	18	734	89.6	89.2	89.0	0.76	0.69	0.57	195	6.6	2.0	2.0	73/60	0.51	359
WEX3-225S-8	18.5	-	39	23	737	90.1	89.8	89.7	0.76	0.7	0.58	240	6.6	1.9	2.0	73/60	0.76	431
WEX3-225M-8	22	-	49	28	737	90.6	90.2	90.0	0.78	0.72	0.6	285	6.6	1.9	2.0	73/60	0.87	392
WEX3-250M-8	30	-	60	35	739	91.3	91.0	90.8	0.79	0.72	0.6	388	6.5	1.9	2.0	75/61	1.34	480
WEX3-280S-8	37	-	74	43	742	91.8	91.4	91.2	0.79	0.75	0.63	476	6.6	1.9	2.0	76/62	2.48	615
WEX3-280M-8	45	-	89	52	743	92.2	92.0	91.5	0.79	0.75	0.63	578	6.6	1.9	2.0	76/62	3.00	630
WEX3-315S-8	55	-	110	64	741	92.5	92.2	92.0	0.8	0.76	0.65	709	6.6	1.8	2.0	82/68	4.41	1045
WEX3-315M-8	75	-	145	84	741	93.1	93.0	93.1	0.8	0.76	0.65	967	6.2	1.8	2.0	82/68	5.66	1155
WEX3-315L1-8	90	-	174	101	741	93.4	93.2	93.1	0.8	0.78	0.66	1160	6.4	1.8	2.0	82/68	6.74	1280
WEX3-315L2-8	110	-	207	120	741	93.7	93.5	93.4	0.82	0.78	0.66	1418	6.4	1.8	2.0	82/68	8.00	1440
WEX3-355S-8	132	-	242	140	745	94.0	93.8	93.5	0.82	0.78	0.66	1692	6.4	1.8	2.0	90/75	12.69	1790
WEX3-355M-8	160	-	299	173	745	94.3	94.2	94.0	0.82	0.78	0.67	2051	6.4	1.8	2.0	90/75	14.51	1910
WEX3-355L1-8	185	-	345	200	745	94.5	94.2	94.0	0.82	0.78	0.67	2371	6.4	1.8	2.0	90/75	16.09	2080
WEX3-355L2-8	200	-	368	213	745	94.6	94.2	94.0	0.83	0.78	0.67	2564	6.4	1.8	2.0	90/75	17.52	2180
WEX3-355LX1-8	220	-	404	234	745	94.6	94.2	94.0	0.83	0.78	0.67	2820	6.4	1.8	2.0	90/75	17.80	2200
WEX3-355LX2-8	250	-	460	267	744	94.6	94.2	94.0	0.83	0.78	0.67	3209	6.4	1.8	2.0	90/75	20.32	2365

Ingress protection

WEX3 standard ingress protection is IP55. Dependingon your specific requirements, this range of our motors can be tailored with IP56, IP65 or IP66 ingressprotection,
The protection level of the shell is designed to safeguard against electric shock to the human body or proximity to live parts or rotating components, to prevent intrusion by foreign bodies, and safeguard against damaging effects caused by water and oil. The code name and interpretation of the protection form is presented in the table below.

Code	Meaning	First numeral	Meaning	Second numeral	Meaning
IP	Level of protection	5	Dust prevention	5	Protected against water spray (12.5L/min @ 0.3 bar)
		6	Dust tight	6	Protected against water jets or heavy seas (100L/min @ 1.0 bar)

Cooling Method

The cooling methods for electrical machines are defined in codes according to IEC 60034-6. This code comprises of the letters IC (International Cooling) and a 3-digit number.
The standards featured in this list are categorized under the cooling method IC 411 (surface-cooled) IC410 and IC416 cooling modes are available tofulfill special requirements of users.
. Insulation Grade and Temperature Rise Limit The insulation grade and temperature rise limit (IEC60034-1)

Insulation grade	Limited temperature°C	The temperature rise limit K
B	130	80
F	155	105
H	180	125

WEX3 standard Insulation grade is F grade insulation, and the temperature rise limit is evaluated as B grade (Δ80K), which enhances the operational longevity of the power systems. Our supply chain is designed to ensure seamless and efficient delivery of top-tier products. Our products are crafted to suit any environment, ensuring optimal performance no matter where they are deployed. and Our exceptional service is tailored to cater to the unique needs of every client, offering unparalleled support and expertise. The operating environment is carefully considered. Depending on customerrequirements, this range of products can be supplied with advanced H grade insulation, offering superior durability. .

Noise levels Our products are engineered so that noise levels
Noise levels are remarkably below the thresholds specified in EN 60034-9, ensuring a quieter operation. Noise measurements are methodically performed according to EN ISO 1680 and EN 21680, adhering to the highest standards. according to class 2 in an anechoic room, guaranteeing accurate results. The sound pressure level "Lp" and the sound powerlevel "Lw" in dB(A) are meticulously indicated for the individual frame sizes in the operating datasheets, ensuring clarity. They apply for rated loads at 50 Hz, with a tolerance of +3dB(A). This ensures that our products consistently operate within optimal acoustic parameters. They apply for rated loads at 60Hz , 2P plus a tolerance of +5dB(A), and 4P or above: +3dB(A).
. Vibration levels
Vibration limit (IEC60034-14)
 

Vibration severity grade	Mounting	Shaft center height H(mm)
		56≤H≤132		H>132
		Displacement /μm	Speed /(mm/s)	Displacement /μm	Speed /(mm/s)
A	Free suspended mounting	45	2.8	45	2.8
	Rigid mounting	-	-	37	2.3
B	Free suspended mounting	18	1.1	29	1.8
	Rigid mounting	-	-	24	1.5

Note: Grade "A" is applicable to motors with no special requirements on vibration. It is the default configuration. Grade "B" for motors with special vibration requirements

Bearing type
 

Frame sizes	Poles	Standard		Option 1		Option 2		Option 3
		DE	NDE	DE	NDE	DE	NDE	DE	NDE
80	2~8	6204-2Z	6204-2Z	-	-	-	-	-	-
90	2~8	6205-2Z	6203-2Z	-	-	-	-	-	-
100	2~8	6206-2Z	6205-2Z	-	-	-	-	-	-
112	2~8	6206-2Z	6206-2Z	-	-	-	-	-	-
132	2~8	6208-2Z	6305-2Z	-	-	-	-	-	-
160	2~8	6309-2Z	6307-2Z	6309/C3	6307/C3	7309	6307	NU309	6307
180	2~8	6310-2Z	6308-2Z	6310/C3	6308/C3	7310	6308	NU310	6308
200	2~8	6312-2Z	6212-2Z	6312/C3	6212/C3	7312	6212	NU312	6212
225	2	6312-2Z	6312-2Z	6312/C3	6312/C3	7312	6312	NU312	6312
	4~8	6313-2Z	6312-2Z	6313/C3	6312/C3	7313	6312	NU313	6312
250	2	6313-2Z	6313-2Z	6313/C3	6313/C3	7313	6313	NU313	6313
	4~8	6314-2Z	6313-2Z	6314/C3	6313/C3	7314	6313	NU314	6313
280	2	6314-2Z	6314-2Z	6314/C3	6314/C3	7314	6314	NU314	6314
	4~8	6317-2Z	6314-2Z	6317/C3	6314/C3	7317	6314	NU317	6314
315	2	6316/C3	6316/C3	-	-	7316	6316	NU316	6316
	4~8	6319/C3	6319/C3	-	-	7319	6319	NU319	6319
355	2	6318/C3	6318/C3	-	-	7318	6318	NU318	6318
	4~8	6322/C3	6322/C3	-	-	7322	6322	NU322	6322

Note: 1. The standard configuration is deep groove ball bearing: H80~280 are sealed and maintainable, H315~355 are relubricated bearings;
2. Optional 1: Re-lubricated bearing, suitable for H160~280 motors
3. Optional 2: Angular contact ball bearing, which is mostly suitable for vertical installation of V1 and can bear larger axial load;
4. Optional 3: Cylindrical roller bearing, which is mostly suitable for horizontal motor installation and can bear larger radial load. . Bearing location
Motor standard design:
H80-H132 Non-drive end designed as the located bearing. H160-H355 Drive end designed as the located bearing.

Lubrication

Maintenance free - sealed for life bearings
 

Mounting type	Frame sizes	Poles	RT≤40°C
B3, B5, B35	80 to 280	2P	20000h
		4P	40000h

Relubrication intervals for horizontal construction type:
 

Mounting type	Frame sizes	Poles	Lubrication interval(h)			Grease quantity (g)
			40°C	50°C	60°C
B3, B5, B35	160 to 355	2P	2500	1000	500	30
		4P	5000	2500	2000	40

Note: 1. The table data is applicable to 50Hz motor. For 60Hz motor, the time interval should be multiplied by 0.8;
2. For vertical motor installation, the lubrication interval shall be divided by 2;
3. Re-greasing intervals should be halved for every 15°C rise above 70°C. . Permissible forces at the shaft end
Maximum radial force (for pulley drive system): The maximum allowable radial force F0(unit: N) for radial load is based on the premise that the load line (center of pulley) must be within the length of the motor shaft extension (the motor shaft elongation is shown in the installation size code E size). The radial force length X (mm) is the distance from the axial extension shoulder to the radial force F0 action line, so when the length X= Max, it is the total length of the axial extension (size value E). Maximum allowable radial force as below table.


. Bearing life
For standard ball bearings, under the action of allowable load, the bearing design life of the motor can meet the following requirements: at least 20000 hours for the 2-pole motor, 4 poles, 6 pole motor at least 30000 hours (refers to the motor life under normal operation at 50Hz and normal maintenance as required).

Certifications

FAQ

Q1: Is customized service available?

A1: Of course, OEM & ODM both are available.


Q2:Can I buy one as sample?

A2: Yes, of course.



Q3: How about your quality control?

A3: Our professional QC will check the quality during the production and do the quality test before shipment.

Q4: What is your payment term?

A4: 30% T/T in advance, 70% balance when receiving B/L copy Or 100% irrevocable L/C at sight.


Q5: What is your lead time?

A5: About 20-30 days after receiving advance deposit or original L/C.


Q6 What certificates do you have?

A6: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.


Q7: What warranty do you provide?

A7: One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.