UL Certification Premium Efficiency Three Phase Electrical Motor with Explosion-Proof Features OEM/ODM

• Customization: Available
• Application: Industrial
• Number of Stator: Three-Phase
• Model NO.: NEXP
• Function: Driving
• Casing Protection: Explosion-Proof Type
• Starting Mode: Auto-induction Voltage-reduced Starting
• Certification: CCC
• Transport Package: Wooden Box
• Trademark: WOLONG
• Origin: China
• HS Code: 8501610000
• Package Size: 40.00cm * 27.00cm * 25.00cm
• Package Gross Weight: 30.000kg

Product Description

Product Description

 

NEXP SERIES EXPLOSION-PROOF PREMIUM EFFICIENCY THREE PHASE INDUCTION MOTOR (FRAME143-449)
Technical Agreement
 

1. General

This technical agreement is established between Nanyang and WWE to facilitate the PO implementation. This agreement must be adhered to strictly unless otherwise explicitly specified on the PO.
 

2. Ratings

Table 1 depicts the correlation between output and frame size
 

HP	3600 (60Hz) 3000(50Hz) RPM	1800(60Hz) 1500(50Hz) RPM	1200 (60Hz)  1000(50Hz) RPM
1		143T	145T
1.5	143T	145T	182T
2	145T	145T	184T
3	182T	182T	213T
5	184T	184T	215T
7.5	213T	213T	254T
10	215T	215T	256T
15	254T	254T	284T
20	256T	256T	286T
25	284TS	284TS/T	324T
30	286TS	286TS/T	326T
40	324TS	324TS/T	364T
50	326TS	326TS/T	365T
60	364TS	364TS/T	404T
75	365TS	365TS/T	405T
100	405TS	405TS/T	444T
125	444TS	444TS/T	445T
150	445TS	445TS/T	447T
200	447TS	447TS/T	449T
250	449TS	449TS/T

 

3. Standard Features

Item	NEXP Series
Power	1-250HP
Poles	2, 4, 6
Certificate	UL certificate E228654; CSA certificate 1224673;
Altitude	3300ft
Ambient temp.	55ºC: service factor 1.15 with temp. rise within class F (115ºC)
Balancing and Vibration	G1.0 Standard: 0. 060 in/sec (p)
Bearing cover	140-210: sealed bearings 250-449: open bearing, both sides fitted with outer and inner covers.

 

Temp. rise for bearing housing	60ºC
Bearing protection	Labyrinth seal structure
Bearing type	Cylindrical bearings for 150-200HP 6 pole motors; Ball bearings for other motors.
Centered core	F1-F2 changeable at site
Drain plug	No drain plug
Efficiency	NEMA Premium Efficiency
End cover	End cover material : cast iron HT250
Fan	Plastic or cast aluminum
Fan cover	Standard material: steel plate, Cast iron for severe environment Fan cover shape: coned
Fastener	Grade 8.8 (equivalent to SAE  grade 5 )
Foot flatness	Normal flatness: 0.25mm
Frame material	Cast iron
Frame size	143-449
Frequency	60Hz 460V; 50Hz 380V
Lubricating grease	Mobil Polyrex EM-2
Earthing	All motors have earthing screw inside terminal box. 250-449: earthing screw at frame feet.
Industrial standard	Primer: red iron primer; no Intermediate; Finish: polyurethane coating
Insulation class	Insulation class F
Insulation system	CNE155 The insulation system can meet the requirement of NEMA MG1-31 frequency conversion duty.
Inverter duty	CT:5:1; VT:10:1
L10 Bearing service life	130000 hours for direct drive; 26280 hours for belt drive; L10a 50000
Lifting solution	1 off lifting lug with inch thread per motor
Mounting solution	F1-F2 changeable to each other.
Installation hole	4 holes in each foot Note: Only 2 holes are for installation. We set 4 holes in case of double frame sizes installation and conversion from F1 to F2.
NEMA Design	B
Lubrication	250-449:re-lubricated structure, One lubricating nipple on end cover at DE , the other on oil pipe at NDE
Rotor	Cast Aluminum
Service factor	1.15 1.0 when operated on a VFD.
Temperature control	Thermostat Harper 7/2/15, please confirm normally closed type, indicate in this spec as well.
Test	IEEE 112 B or CSA C390
Service duty	S1
Nameplate	See clause 4
Packing	Wooden (details to be discussed). Suitable for fork from 2 directions for frame 447/9.
Warranty	Three years.

 

4. Name Plate Information (Typical)

CAT.NO.		NEXP			FRAME	449T	PHASE	3
DE BRG		6318-C3	ODE BRG	6314-C3	SER.	15F4Y02AW000-01
MAX.AMB.		55ºC	INS.CLASS	F	RATING	CONT	WEIGHT	1152KG
60Hz	HP	250	RPM	1790	HP	200	RPM	1488	50Hz
	VOLTS	460			VOLTS	380	415
	F.L.AMPS	284			F.L.AMPS	275	225
	CONN.	△		CODE     G	CONN.	△	△
	S.F	1.15		DESIGN   B	S.F	1.15	DESIGN B	CODE J
	NEMA NOM.EFF.		96.20%	P.F. 0.855	NEMA NOM.EFF.	96.0%		P.F. 0.85
	NEMA MIN.EFF.           95.40%				NEMA MIN.EFF.        95.2%
	MAX.KVAR	56
INVERTER RATED  PWM VFD - 10:1VT, 5:1 CT ,1.0SF

Note: Greg Harper 7/2/15:
This nameplate sample does not include the explosion-proof rating such as Class I, Division I, etc.
At EASA, I discussed with Mr. Liu the necessity for various temperature codes at different ambient temperatures. I also forwarded him an HHI nameplate copy for reference. This might be the outdated nameplate. Kindly resubmit the updated version.
 

5. Electrical Performances

Table 2: Performance at 460V 60Hz
 

HP	Full Load RPM	Current (A)		KVAR CODE	Rotor Inertia (kg.m)	Efficiency (%)				Power Factor (%)	LRT (%)	BDT (%)
		FLA	LRA			1/2 load	3/4 load	Full load
								Nom.	Min.
1	1773	1.35	15	N	0.0067	81.3	84.5	85.5	82.5	78.5	311	412
1	1175	1.65	15	N	0.0081	78.0	81.0	82.5	80.0	66.0	342	341
1.5	3511	1.85	20	M	0.0026	83.5	85.1	84.0	81.5	84.5	289	378
1.5	1769	1.95	20	M	0.0091	83.0	86.0	86.5	84.0	79.0	291	377
1.5	1183	2.07	20	M	0.011	84.5	87	87.5	85.5	71.0	239	341
2	3504	2.5	25	L	0.0035	85.3	86.0	85.5	82.5	86.0	219	252
2	1765	2.6	25	L	0.017	84.0	86.0	86.5	84.0	83.7	250	298
2	1183	2.8	25	L	0.018	86.0	88.0	88.5	86.5	73.0	249	324
3	3528	3.5	32	K	0.0089	85.5	87.0	86.5	84.0	87.0	187	307
3	1761	3.8	32	K	0.019	87.5	89.0	89.5	87.5	77.0	232	322
3	1182	3.95	32	K	0.035	87.5	89.0	89.5	87.5	71.0	295	349
5	3525	6	46	J	0.015	85.0	87.0	88.5	86.5	85.0	177	306
5	1756	7	46	J	0.028	87.0	89.2	89.5	87.5	81.0	187	265
5	1178	7.5	46	J	0.04	85.0	89.5	89.5	87.5	75.0	222	275
7.5	3539	8.3	63.5	H	0.033	85.0	90.0	89.5	87.5	86.0	181	262
7.5	1773	8.9	63.5	H	0.036	89.0	91.5	91.7	90.2	84.0	239	302
7.5	1186	12.5	63.5	H	0.06	89.0	91.0	91.0	89.5	78.0	206	289
10	3540	11.5	81	H	0.038	89.0	90.2	90.2	88.5	88.0	183	264
10	1772	12.2	81	H	0.073	90.0	92.0	91.7	90.2	82.0	251	266
10	1178	12.5	81	H	0.065	89.0	90.0	91.0	89.5	81.0	204	289

15 15 15	3538 1767 1181	16.5 17.5 18.1	116 116 145	G G G	0.058 0.097 0.16	89.0 89.0 90.0	90.0 90.0 92.0	91.0 92.4 91.7	89.5 91.0 90.2	86.0 87.0 82.0	221 196 210	268 267 248
20 20 20	3531 1777 1179	22.8 23 23.5	145 145 145	G G G	0.065 0.18 0.20	88.0 90.0 89.0	90.0 92.0 91.5	91.0 93.0 91.7	89.5 91.7 90.2	88.0 87.0 81.0	206 193 15 5	245 248 240

 

HP	Full Load RPM	Current (A)		KVAR CODE	Rotor Inertia (kg.m)	Efficiency (%)				Power Factor (%)	LRT (%)	BDT (%)
		FLA	LRA			1/2 load	3/4 load	Full load
								Nom.	Min.
25	3560	27.5	182.5	G	0.082	91.5	91.9	91.7	90.2	88.0	170	261
25	1778	27.5	182.5	G	0.24	93.1	93.6	93.6	92.4	85.0	171	251
25	1187	29.0	182.5	G	0.28	92.8	93.2	93.0	91.7	83.0	180	250
30	3560	32.5	217.5	G	0.098	91.5	91.9	91.7	90.2	89.0	179	265
30	1777	32.5	217.5	G	0.40	93.1	93.7	93.6	92.4	87.0	172	251
30	1187	37.1	217.5	G	0.33	92.8	93.2	93.0	91.7	78.0	158	238
40	3566	44.5	290.0	G	0.15	91.8	92.4	92.4	91.0	88.0	169	238
40	1783	46.0	290.0	G	0.46	93.9	94.2	94.1	93.0	85.0	186	252
40	1188	47.5	290.0	G	0.57	93.9	94.3	94.1	93.0	83.0	219	264
50	3573	54.0	362.5	G	0.18	92.4	93.0	93.0	91.7	88.0	184	243
50	1783	55.0	362.5	G	0.77	94.2	94.6	94.5	93.6	85.0	173	263
50	1188	56.5	362.5	G	0.65	93.9	94.3	94.1	93.0	83.0	209	256
60	3573	68.0	435.0	G	0.32	93.1	93.6	93.6	92.4	88.0	159	267
60	1786	70.0	435.0	G	0.87	94.2	94.9	95.0	94.1	85.0	195	270
60	1192	69.0	435.0	G	1.1	94.1	94.5	94.5	93.6	83.0	187	234
75	3573	84.5	542.5	G	0.36	93.2	93.6	93.6	92.4	88.0	172	277
75	1786	86.5	542.5	G	1.1	94.5	95.3	95.4	94.5	85.0	211	275
75	1192	89.0	542.5	G	1.3	94.2	94.6	94.5	93.6	83.0	197	251
100	3579	110.0	725.0	G	0.55	93.7	94.1	94.1	93.0	89.0	159	279
100	1790	112.0	725.0	G	1.4	94.8	95.4	95.4	94.5	87.0	199	247
100	1190	117.0	725.0	G	2.4	94.7	95.1	95.0	94.1	84.0	152	241
125	3586	130.0	907.5	G	0.79	94.2	94.8	95.0	94.1	89.0	153	268
125	1789	133.0	907.5	G	2.4	94.8	95.4	95.4	94.5	85.0	188	271
125	1191	135.0	907.5	G	2.9	94.7	95.1	95.0	94.1	84.0	148	246
150	3585	160.0	1085.0	G	0.97	94.4	94.9	95.0	94.1	87.0	150	256
150	1789	162.5	1085.0	G	2.9	95.7	95.8	95.8	95.0	86.0	164	262
150	1191	166.0	1085.0	G	3.5	95.3	95.8	95.8	95.0	82.0	210	252
200	3584	213.5	1450.0	G	1.3	95.0	95.4	95.4	94.5	87.0	168	264
200	1789	223.0	1450.0	G	3.5	95.8	96.2	96.2	95.4	85.0	187	275
200	1191	227.5	1450.0	G	4.3	95.5	95.9	95.8	95.0	82.0	157	263
250	3585	262.0	1825.0	G	1.6	95.3	95.7	95.8	95.0	87.0	200	280
250	1788	268.0	1825.0	G	4.3	96.0	96.3	96.2	95.4	85.0	228	244
250	1191	280.0	1825.0	G	---	95.5	95.9	95.8	95.0	82.0	185	250

1. Mounting & Overall Dimensions

Table 3: Dimensions for Foot-Mounted Motors with Single Straight-Shaft Extension(Inch)
Harper 7/2/15 - Table 3 is currently missing. Please insert and resubmit. The C dimension is necessary to confirm the usability of the 'cone' shaped fan cover.


Table 4 Dimensions for C Face-Mounted or Footless Motors (Inch)
 

Frame Size	AJ	AK	BA*	BB Min	BC	BD Max	BF Hole			U	AH	Keyway
							Number	Tap Size	Bolt Penetration Allowance			R	ES Min	S
143TC  145TC	5.88	4.5	2.25*	0.16	+0.12	6.5	4	3/8-16	0.56	0.875	2.12	0.771	1.41	0.188
182TC  184TC	7.25	8.5	2.75*	0.25	+0.12	9	4	1/2-13	0.75	1.125	2.62	0.986	1.78	0.25
213TC  215TC	7.25	8.5	3.5*	0.25	+0.25	9	4	1/2-13	0.75	1.375	3.12	1.201	2.41	0.312
254TC  256TC	7.25	8.5	4.25*	0.25	+0.25	10	4	1/2-13	0.75	1.625	3.75	1.416	2.91	0.375
284TC   286TC	9	10.5	4.75	0.25	+0.25	11.25	4	1/2-13	0.75	1.875	4.38	1.591	3.28	0.500
284TSC  286TSC	9	10.5	4.75	0.25	+0.25	11.25	4	1/2-13	0.75	1.625	3.00	1.416	1.91	0.375
324TC   326TC	11	12.5	5.25	0.25	+0.25	14	4	5/8-11	0.94	2.125	5.00	1.845	3.91	0.500
324TSC  326TSC	11	12.5	5.25	0.25	+0.25	14	4	5/8-11	0.94	1.875	3.50	1.591	2.03	0.500
364TC   365TC	11	12.5	5.88	0.25	+0.25	14	8	5/8-11	0.94	2.375	5.62	2.021	4.28	0.625

364TSC  365TSC	11	12.5	5.88	0.25	+0.25	14	8	5/8-11	0.94	1.875	3.50	1.591	2.03	0.500
404TC   405TC	11	12.5	6.62	0.25	+0.25	15.5	8	5/8-11	0.94	2.875	7.00	2.450	5.65	0.750
404TSC  405TSC	11	12.5	6.62	0.25	+0.25	15.5	8	5/8-11	0.94	2.125	4.00	1.845	2.78	0.500
444TC   445TC	14	16	7.5	0.25	+0.25	18	8	5/8-11	0.94	3.375	8.25	2.880	6.91	0.875
444TSC  445TSC	14	16	7.5	0.25	+0.25	18	8	5/8-11	0.94	2.375	4.50	2.021	3.03	0.625
447TC   449TC	14	16	7.5	0.25	+0.25	18	8	5/8-11	0.94	3.375	8.25	2.880	6.91	0.875
447TSC  449TSC	14	16	7.5	0.25	+0.25	18	8	5/8-11	0.94	2.375	4.50	2.021	3.03	0.625

* For frames 143TC-256TC, the BA dimension deviates from NEMA MG1 4.4.4 to ensure interchangeability from TC flange to T flange.

Certifications

FAQ

Q1: Is customized service available?

A1: Of course, OEM & ODM both are available.


Q2:Can I buy one as sample?

A2: Yes, of course.



Q3: How about your quality control?

A3: Our professional QC will check the quality during the production and do the quality test before shipment.

Q4: What is your payment term?

A4: 30% T/T in advance, 70% balance when receiving B/L copy Or 100% irrevocable L/C at sight.


Q5: What is your lead time?

A5: About 20-30 days after receiving advance deposit or original L/C.


Q6 What certificates do you have?

A6: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.


Q7: What warranty do you provide?

A7: One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.
Q1: Is customized service available?

A1: Of course, OEM & ODM both are available.


Q2:Can I buy one as sample?

A2: Yes, of course.



Q3: How about your quality control?

A3: Our professional QC will check the quality during the production and do the quality test before shipment.

Q4: What is your payment term?

A4: 30% T/T in advance, 70% balance when receiving B/L copy Or 100% irrevocable L/C at sight.


Q5: What is your lead time?

A5: About 20-30 days after receiving advance deposit or original L/C.


Q6 What certificates do you have?

A6: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.


Q7: What warranty do you provide?

A7: One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.